- Reliable HVAC Solutions for a Better Tomorrow
- 24/7 Emergency Service
✅ Licensed & Insured · 10-Year Warranty
AC installation and replacement done right by certified XRP technicians. A high-efficiency system sized for Katy’s heat and humidity, at one honest, all-inclusive turnkey price. Permits, equipment, and old-unit disposal are included, and you don’t pay the balance until cold air is flowing. Free on-site estimate across Katy and Greater Houston.
Turnkey pricing, no hidden charges
Goodman · Carrier · Trane · Lennox
7+ years · 300+ installs in Houston
On-site quote by an XRP expert technician
No obligation · No hidden fees · We reply fast
Sound Familiar?
If you’ve started calling around, you’ve probably already run into this.
The price sounds fine — then come "extras" for permits, hauling away the old unit, and a trip charge. The number you approved is never the number you pay.
They just match the old unit and guess. An oversized system short-cycles and leaves your home cold but clammy; an undersized one never keeps up in the Katy humidity — and you pay for it in bills and early breakdowns.
The big companies book you two or three weeks out while your family sweats through the Katy summer, sleeps badly, and waits. And waits.
Every day you wait is another night in the heat — and another quote with hidden fees you’ll only spot on the final bill. Choosing wrong doesn’t just cost money now; it costs you comfort and repairs for years.
The Turnkey Difference
XRP does it “total out-the-door” – equipment, labor, permits, and old-unit disposal in a single flat turnkey price. We measure your home properly, install the same day, and you don’t pay the balance until cold air is flowing. Nothing hidden. Nothing extra.
Repair or Replace?
Not sure whether to keep patching your old unit or invest in a new one? If two or more of these sound like your system, a new AC install usually pays for itself in comfort and lower bills.
Most AC systems in Texas are worn out by year 12 - running harder every summer just to keep up.
A tired, low-efficiency unit quietly costs you more every month than a new SEER2 system would.
If a repair costs more than the unit's age × $150, replacing is almost always the smarter money.
Hot-and-cold spots usually mean the system is the wrong size or on
its last legs.
An aging or oversized unit cools the air but stops pulling moisture - a common Katy complaint.
R-22 is phased out and expensive - a pre-2010 system is on borrowed
time.
Our Contract System
Most “surprise bills” come from add-ons the other guys leave off the quote. XRP writes it all into one turnkey contract – so the number you approve is the number you pay.
Equipment, labor, city permits, Freon reclamation, and disposal of your old unit bundled into one flat "out-the-door" rate. No line-item surprises.
10-year manufacturer parts warranty plus our own labor warranty — protecting both your equipment and
our workmanship.
An expert XRP technician measures your home in person and gives you an honest, written quote — free, with no obligation.
Exact Goodman model numbers, SEER2 efficiency ratings, and every cost — printed on a clear written contract before any work starts.
We verify your electrical panel amperage and test every gas connection and flue, so your new system runs safely from
day one.
Just a 10–20% deposit to schedule. The balance is due only after your system is running and blowing
cold air.
Never subcontractors
Honest written quote, no surprises
Not right? We come back & fix it
Background-checked technicians
See The Difference
Real jobs, real crews. Watch how a clean XRP install looks from the first measurement to the final cold-air test.
How Long Does It Take?
Right-sizing matters more than speed — an oversized unit short-cycles and an undersized one never keeps up. Here’s exactly how XRP gets your Katy home cool the right way.
We visit, inspect your attic, ducts, gas line and panel, and give you a written turnkey quote on the spot.
A proper load calculation tells us your true match — 2-ton, 3-ton or 5-ton — not just “same as the old one.”
A straight Goodman changeout is typically completed the same day, cleanly, by our own crew.
The final 60–90 minutes of every install is spent running rigorous safety and performance tests before we hand over the keys.
Deposit to schedule
Balance only after it runs
Standard install
Goodman changeout, same day
Full system + ductwork
If ventilation needs redesign
SEER2 efficiency
Meets Texas energy code
Correct tonnage verified for your home — not just matched to the old unit.
Attic ducts confirmed to handle full CFM so the coil never freezes.
Mechanical permit pulled and handed to you — included, never billed separately.
Exact model numbers & SEER2 ratings written down before we start.
Installed in the drain pan to prevent attic water leaks down the line.
Zero-leak verification at every connection with proper roof ventilation.
Attic, living space and yard cleared of the old unit, trash and metal.
Goodman warranty papers & permit receipt handed over at completion.
If it’s needed to get your AC running safely, it’s already in your one flat turnkey price. That’s the whole point.
Fall is the smart time to replace
2 years labor free
Financing available
10-year warranty
Pay after it works
Don’t let a big number stop you — flexible financing lets you spread the cost and stay cool now, with low monthly payments (on approved credit).
BEST VALUE
2-Ton Complete System
3-Ton Complete System
4-Ton Complete System
5-Ton Complete System
PREMIUM
2-Ton Complete System
3-Ton Complete System
4-Ton Complete System
5-Ton Complete System
PREMIUM+ · BY MODEL
XR15 -HIGH-EFFICIENCY
3-Ton Complete System
4-Ton Complete System
5-Ton Complete System
XL17i -HIGH-EFFICIENCY, TWO-STAGE
3-Ton Complete System
4-Ton Complete System
5-Ton Complete System
XV18 – PREMIUM VARIABLE-SPEED
3-Ton Complete System
4-Ton Complete System
5-Ton Complete System
LUXURY – CUSTOM
Lennox systems are quoted per home for the best efficiency and comfort match. Talk to our expert for a custom price.
What Katy Homeowners Say
Talk to a real XRP technician – get answers and book your free estimate in one call.
Mon–Fri 7a–7p · Sat 8a–5p · Sun Emergency
Before You Book
A standard Goodman changeout is usually completed the same day in about 6–8 hours. If your ventilation needs a full system and ductwork redesign, plan on 2–4 days. Every job ends with a 60–90 minute safety and performance commissioning before we consider it done.
We install and service all major brands — Goodman, Carrier, Trane, Lennox and Amana. Goodman is our go-to for reliable, high-value installs, and we always write the exact model numbers and SEER2 rating into your contract.
Yes. Our turnkey pricing means the City of Houston mechanical permit, Freon reclamation, and haul-away of your old equipment are all bundled into one price. No separate permit fees, disposal fees or trip charges.
No. We take a small 10–20% deposit to schedule and order equipment. The balance isn’t due until your new system is installed, running, and blowing cold air. Financing options are also available.
Yes. A new system is a big purchase, so we offer flexible financing that lets you spread the cost into low monthly payments (on approved credit) instead of paying it all at once. Ask about current financing options when you book your free estimate.
Usually, yes on both. A properly sized, high-efficiency SEER2 system uses less energy than a worn-out unit, so your cooling bills typically drop. And because we size for Katy’s humidity — not just temperature — a right-sized system pulls moisture out of the air, so your home feels cool and dry instead of cold and clammy.
We’re based in Katy and serve the surrounding Greater Houston area — including Cypress, Sugar Land, Spring and Houston. Not sure if you’re in range? Just call (346) 806-2700 and ask.
Proudly Local
Based right here in Katy, TX 77449, we install and replace AC systems across the west and northwest Houston metro – including the Cinco Ranch, Grand Lakes, Cross Creek Ranch and Firethorne communities. Fast, and same-day when you need it.
Ready When You Are
Book your free on-site estimate and get an honest, all-inclusive turnkey quote from a certified XRP technician. No pressure, no hidden fees.
On-site quote by an XRP expert technician
No obligation · We reply fast
